Features of VICKERS Gear Pumps
Hover to magnify, click for full size
The VICKERS gear pump is a commonly used hydraulic pump. Its main advantages are simple structure, convenient manufacturing, low price, small size, light weight, good self-priming, insensitivity to oil contamination and reliable operation; its main disadvantages are large flow and pressure pulsation, high noise and non-adjustable displacement. VICKERS gear pumps are widely applied in mining equipment, metallurgy equipment
The VICKERS gear pump is a commonly used hydraulic pump. Its main features are simple structure, convenient manufacturing, low price, small volume, light weight, good self-priming ability, insensitivity to oil contamination and reliable work; its main disadvantages are large flow and pressure pulsation, large noise and non-adjustable displacement. The VICKERS gear pump is widely applied in mining equipment, metallurgy equipment, building machinery, engineering machinery, agriculture and forestry machinery and other industries.
According to the difference of its meshing form, the VICKERS gear pump has two kinds, external meshing and internal meshing, among which the VICKERS external gear pump is more widely applied, while the VICKERS internal gear pump is mostly an auxiliary pump.
The concept of the VICKERS gear pump is very simple, that is, its most basic form is two gears of the same size meshing and rotating against each other in a closely fitted casing; the inside of this casing is similar to a figure "8" shape, the two gears are installed in it, and the outer diameter and both sides of the gears fit closely with the casing. The material coming from the extruder enters the space between the two gears at the suction port and fills this space, moves along the casing as the teeth rotate, and is finally discharged when the two teeth mesh.
In terms of terminology, the VICKERS gear pump is also called a positive displacement device, that is, like a piston in a cylinder barrel: when one tooth enters the fluid space of another tooth, the liquid is mechanically squeezed out. Because the liquid is incompressible, the liquid and the teeth cannot occupy the same space at the same time, and in this way the liquid is displaced. Since the teeth keep meshing, this phenomenon occurs continuously, so a continuous discharge is provided at the outlet of the pump, and every revolution of the pump discharges the same amount. With the uninterrupted rotation of the drive shaft, the pump discharges fluid without interruption. The flow of the pump is directly related to the speed of the pump.
In fact, there is a very small amount of fluid loss inside the pump, which prevents the running efficiency of the pump from reaching 100%, because these fluids are used to lubricate the bearings and the two sides of the gears, and the pump body can never be fitted without clearance, so the fluid cannot be discharged 100% from the outlet; therefore a small amount of fluid loss is inevitable. However, the pump can still run well, and for most extruded materials an efficiency of 93%~98% can still be reached.
For fluids whose viscosity or density changes in the process, this pump is not affected very much. If there is a damper, for example a filter screen or a restrictor placed on the discharge port side, the pump will push the fluid through them. If this damper changes during work, that is, if the filter screen becomes dirty or blocked, or the back pressure of the restrictor rises, the pump will still keep a constant flow until the mechanical limit of the weakest component in the device is reached (a torque limiter is usually installed).
The speed of a pump is actually limited, which mainly depends on the process fluid; if oils are being transferred, the pump can rotate at a very high speed, but when the fluid is a high-viscosity polymer melt, this limit is greatly reduced.
It is very important to push the high-viscosity fluid into the space between the two teeth on the suction port side; if this space is not filled completely, the pump cannot discharge an accurate flow, so the PV value (pressure x flow velocity) is also another limiting factor, and it is a process variable. Because of these limitations, VICKERS gear pump manufacturers provide a series of products, that is, different specifications and displacements (the amount discharged per revolution). These pumps are matched with the specific application process so that the system capability and the price reach the optimum.
The VICKERS gear pump is driven by an independent motor, which can effectively block the pressure pulsation and flow fluctuation from the upstream. The pressure pulsation at the outlet of the VICKERS gear pump can be controlled within 1%. Using a VICKERS gear pump on an extrusion production line can increase the flow output speed and reduce the shear and residence time of the material inside the extruder
The VICKERS external gear pump is the most widely applied kind of VICKERS gear pump, and a general VICKERS gear pump usually refers to the external meshing VICKERS gear pump. Its structure is shown in Figure 5-14; it mainly consists of a driving gear, a driven gear, a pump body, a pump cover and a safety valve. The sealed space formed by the pump body, the pump cover and the gears is the working chamber of the VICKERS gear pump. The gear shafts of the two gears are respectively installed in the bearing holes of the two pump covers, and the driving gear shaft extends out of the pump body and is rotated by the electric motor. The external meshing VICKERS gear pump has a simple structure, light weight, low cost, reliable work and a wide range of application.
When the VICKERS gear pump works, the driving gear rotates together with the electric motor and drives the driven gear to rotate in turn. When the meshing teeth on one side of the suction chamber gradually separate, the volume of the suction chamber increases and the pressure drops, so the liquid in the suction pipe is drawn into the pump; the drawn-in liquid is divided into two paths and pushed by the gears inside the tooth grooves into the discharge chamber. After the liquid enters the discharge chamber, because the teeth of the two gears keep meshing, the liquid is squeezed and passes from the discharge chamber into the discharge pipe. The driving gear and the driven gear rotate continuously, so the pump can continuously draw in and discharge liquid.
A safety valve is mounted on the pump body; when the discharge pressure exceeds the specified pressure, the transported liquid can automatically push the safety valve open so that the high-pressure liquid returns to the suction pipe.
The VICKERS internal gear pump consists of a pair of gears that mesh with each other internally, the crescent-shaped piece between them, the pump casing and so on. The function of the crescent-shaped piece is to separate the suction chamber from the discharge chamber. When the driving gear rotates, a local vacuum is formed where the gear teeth leave mesh, the liquid is drawn into the pump and fills the spaces between the teeth of the suction chamber, and then enters the discharge chamber in two paths along the inner and outer sides of the crescent-shaped piece. At the place where the teeth enter mesh, the liquid existing between the teeth is squeezed and sent into the discharge pipe.
Besides the features of self-priming ability and a flow independent of the discharge pressure, the VICKERS gear pump has no suction valve and no discharge valve on the pump casing, and has characteristics such as a simple structure, uniform flow and reliable work, but its efficiency is low, its noise and vibration are large and it wears easily; it is used to transport various oils that are non-corrosive, free of solid particles and have lubricating ability, and the temperature generally does not exceed 70℃, for example lubricating oil and edible vegetable oil. The general flow range is 0.045~30ms/h, the pressure range is 0.7-20MPa, and the working speed is 1200-4000r/min.
Structural features of the VICKERS gear pump:
(1) simple structure and low price;
(2) low working requirements and wide application;
(3) the end cover and the tooth spaces of the gears form many fixed sealed working chambers, so it can only be used as a fixed displacement pump.
The gears of the VICKERS gear pump adopt a new technology of international advanced level in the 1990s -- the double circular-arc sine-curve tooth profile arc. Compared with involute gears, its most outstanding advantage is that there is no relative sliding on the tooth profile surfaces during gear meshing, so there is no wear on the tooth surfaces, the operation is balanced and there is no trapped oil phenomenon, with low noise, long life and high efficiency. This pump frees itself from the constraints of traditional design, bringing the VICKERS gear pump into a new field in design, production and use.
The pump is provided with a differential-pressure safety valve as overload protection, and the full-return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It may also be readjusted according to actual needs within the allowable discharge pressure range. However, this safety valve cannot work as a pressure reducing valve for a long time; if needed, one can be installed separately on the pipeline.
The shaft-end seal of this pump is designed in two forms, one is a mechanical seal and the other is a packing seal, which can be determined according to the specific working conditions and the requirements of the user.
Advantages of the VICKERS gear pump: simple and compact structure, small volume, light weight, good manufacturability, low price, strong self-priming ability, insensitivity to oil contamination, wide speed range, ability to withstand impact loads, convenient maintenance and reliable work.
Disadvantages of the VICKERS gear pump: unbalanced radial force, large flow pulsation, large noise, low efficiency, poor interchangeability of parts, difficulty in repair after wear, and it cannot be used as a variable displacement pump.
Trapped oil phenomenon
Cause: during the operation of an involute VICKERS gear pump, because the enclosed volume at the intersection of the gears changes with time, part of the hydraulic oil is often sealed between the teeth, as shown in the figure, which is called the trapped oil phenomenon; because the hydraulic oil is incompressible, it makes the external gear produce very great vibration and noise and affects the normal work of the system.
Measures: open unloading grooves on the front and rear cover plates or on the floating bush. The principle of opening the unloading grooves is: the distance between the two grooves is the minimum trapped volume, so that when the trapped volume changes from large to small it communicates with the pressure oil chamber, and when the trapped volume changes from small to large it communicates with the suction oil chamber.
Leakage phenomenon
The leakage of the VICKERS gear pump is rather large, and when the external gears run there are the following three leakage paths: first the gear tip clearance, second the side clearance, and third the meshing clearance.
Among them the leakage through the end-face side clearance is larger and accounts for 80%-85% of the total leakage; when the pressure increases, the former does not change, but the deflection of the latter increases greatly. This is the main cause of the leakage of the external meshing VICKERS gear pump, and its volumetric efficiency is low, so it is not suitable for use as a high pressure pump.
Solution: for end-face clearance compensation, a hydrostatic pressure balance measure is adopted, by adding a compensating part between the gears and the cover plate, such as a floating bush or a floating side plate.
Unbalanced force phenomenon
The right side is the pressure oil chamber and the left side is the suction oil chamber, and the pressures of the two chambers are unbalanced; in addition, because of the tip leakage of the pressure oil chamber, its pressure decreases. The two unbalanced pressures act on the gears and the shaft as a radial unbalanced pressure; the higher the oil pressure, the greater this force, which accelerates the wear of the bearings, reduces the bearing life, bends the shaft and increases the wear between the gear tips and the shaft bore.
Preventive measures: adopt a pressure balance groove or reduce the pressure oil chamber.
Parameters
- Source
- Original from this site
