Professional Industrial Pump
& Hydraulic Equipment Manufacturer
HAIGTS supplies high quality screw pumps, gear pumps, hydraulic cylinders and coolers for the oil, chemical, marine and power industries.
Featured products

SMT Series,Iron-cased screw pump series
The Settima SMT is an industrial three-screw pump for low-to-medium pressure up to 80 bar, in dry or submerged versions, with a built-in or external relief valve. Shorter SMT16B (up to 40 bar) and compact SMT8B (up to 15 bar) versions complete the same family.

SM Submerged Screw Pump Series
Settima SM is an oil-immersed (submerged) triple screw pump used for home elevators and lifts, suitable for low to medium pressure (up to 8 bar); it comes in two versions, solid shaft and hollow shaft (direct coupling to the motor), featuring low noise operation, long service life, and low maintenance costs.

GR Series High Pressure Screw Pump
HAIGTS Technology screw pumps are original imported Italian SETTIMA screw pumps. The GR series screw pumps are high pressure screw pumps with maximum pressure up to 25MP(250bar), compliant with European BKT, SAE-A standards and German SAE-B standard.

SMT16B_AC Hollow Shaft Series
HAIGTS Technology SETTIMA hollow shaft screw pump, models from SMT16B-GR20-25-32-40-45-55-60-70-80-90-110-130. This medium and low pressure noise free screw pump is an industrial triple screw pump suitable for use at low and medium pressure (40 bar).

HPS3 High Pressure Gear Pump
The HPS3 series high pressure gear pumps run quietly and efficiently, with a continuous pressure of 20 MPa, displacements from 16 cc to 36 cc and a maximum speed of 3000 rpm. They are used in mobile machinery, packaging machinery, presses and general purpose hydraulic power units.

SMH Medium Pressure Triple Screw Pump
The SMH medium pressure triple screw pump runs with low vibration and low noise, giving stable, pulsation free output at high efficiency, with strong self priming ability, several mounting options and a compact structure. The SMH series medium pressure screw pump reaches a maximum pressure of 8 MPa and a flow of up to 180 m3/h, applied in the petrochemical, marine, rubber and plastics and hydropower industries.

Oil-Immersed Motor
The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. It has an aluminium housing with cooling fins, flange mounting and a top terminal box, and runs quietly with a compact build, making it suitable for hydraulic lifts and hydraulic stations that need a quiet oil source.

SMT16B Series (Triple Screw Pump)
The Settima SMT16B is an industrial three-screw pump for low pressure up to 40 bar, built for quiet, long-life operation. Its screws are shorter than on the SMT, so it fits machines with limited space. A built-in or external relief valve is available, in dry and submerged versions.
Featured cases

Application of gear pumps in the construction machinery industry and mechanical engineering industry
Dust, vibration and low temperature are normal on a construction site, and the hydraulic pump decides whether the machine keeps working. This article covers the lift, steering and fan circuits and how to size them.

Hydraulic pumps in energy and power applications
Lubrication, shaft lifting, sealing oil and governing all rely on auxiliary oil systems around the main machine. The article sorts the pump sets by function and explains redundancy.

Screw pumps and coolers are widely used for lubrication, cooling, and other purposes in thermal, hydropower, and wind power in the electric power industry
Turbine oil lubricates the bearings and carries their heat away, so a loss of supply or of temperature control puts the whole unit at risk. This article covers thermal, hydro and wind service.

Gear pumps, screw pumps, and coolers for the metal smelting industry are widely used in metallurgical hydraulic stations and lubrication and cooling systems
Rolling mills and continuous casters run day and night, so one stopped pump can halt a line. The article separates hydraulic power from lubrication supply and gives the selection points.

Gear pumps and sensor instruments in the machine tool industry are used for equipment such as CNC machine tools, machining centers, injection molding machines, presses, and machines.
Machine tool hydraulics ask little flow but much repeatability, steady holding and low noise. The article walks through three circuit groups and the usual troubleshooting order.

Gearbox industrial gear pumps and screw pumps as well as coolers can be used for the gearbox's matching lubrication and cooling system.
Most gearbox failures start with the oil: too hot, a blocked filter or too little supply. The article opens up one complete circuit and explains the temperature stages and bypass protection.

Coolers, gear pumps, and hydraulic motors in the marine industry can be used in equipment such as marine hydraulic systems, deck machinery, and port.
Anchor winches, deck cranes, steering gears and port cranes start, stop and reverse repeatedly under heavy load. The article covers cooling, materials, class approval and inspection access.

Gear pumps and coolers in the petrochemical industry can be used in the oil and gas industry as well as the chemical and pharmaceutical industries
Petrochemical media range from crude and fuel oil to solvents and additives, so the medium comes before the numbers. The article splits the duty into three tasks and lists the usual failure modes.
R&D Capability
HAIGTS has an independent research and development center and a number of patented technologies, and continuously invests in new products and process improvements.…
Precision Manufacturing
High-precision machining and inspection equipment, with key processes fully CNC-controlled, keeps every product consistent and reliable.…
Full-Process Quality Control
Multi-stage inspection from incoming raw material to finished product, with traceable key components, so every unit delivered is reliable.…
Fast Delivery & Service System
A mature supply chain and a local service network give timely response, technical advice and complete after-sales support.…
Professional Manufacturing
Years of hydraulic expertise with strict process control…
Reliable Quality
High-standard inspection, stable and durable performance…
Export Service
Global delivery with OEM / batch customization…
Customer First
HAIGTS Technology Our mission is to put customers first, treat everyone fairly, respond quickly to needs, provide a comprehensive after-sales service system and technical support, attention to every detail, offer professional services, and provide technical support and after-sales service.…
Featured news
strictly control Quality gating process,Ensure the product is intact and timely
HAIGTS Technology has always maintained a pursuit of excellence in details, strictly controlling quality to ensure that products are delivered intact and on time to customers.…
Features of VICKERS Gear Pumps
The VICKERS gear pump is a commonly used hydraulic pump. Its main advantages are simple structure, convenient manufacturing, low price, small size, light weight, good self-priming, insensitivity to oil contamination and reliable operation; its main disadvantages are large flow and pressure pulsation, high noise and non-adjustable displacement. VICKERS gear pumps are widely applied in mining equipment, metallurgy equipment…
Gear Pump vs Screw Pump: Pros and Cons
Comparison of the advantages and disadvantages of gear pumps and screw pumps. I. Advantages and disadvantages of gear pumps. 1. Advantages of gear pumps: reliable structure, stable operation and low cost; can convey viscous media such as non-corrosive oils; the pump has its own safety valve and delivers media at a higher pressure head. 2. Disadvantages of gear pumps: not suitable for liquids containing solid particles or highly volatile, low flash point liquids; long…
Features of HPG3 High Efficiency Gear Pumps
The HPG3 series hydraulic gear pump is an external gear pump researched, developed and produced by HAIGTS with advanced technology, featuring automatic axial clearance compensation and radial hydraulic balance. It adopts a three-piece structure located by a figure 8 spigot, with bushings fitted inside the cast aluminum alloy front and rear covers and a special cast iron middle body. It is therefore impact resistant and covers a wide range of oil temperatures and rotating speeds, even…
Latest news
Industry News
More →Company News
More →- Comprehensive Print Free EditionHAIGTS Technology Launch Comprehensive Print Free Edition, Print, Print
- strictly control Quality gating process,Ensure the product is intact and timelyHAIGTS Technology has always maintained a pursuit of excellence in details, strictly contr…
- Gear Pump vs Screw Pump: Pros and ConsComparison of the advantages and disadvantages of gear pumps and screw pumps. I. Advantage…
- Features of HPG3 High Efficiency Gear PumpsThe HPG3 series hydraulic gear pump is an external gear pump researched, developed and pro…
Need a professional industrial solution?
Our engineering team is ready to help you select the right product and provide technical support.









































