HPG2 High Pressure Gear Pump
The HPG2 series high pressure gear pump powers small hydraulic systems and small-flow high pressure lubrication systems. Parameter table: Outline drawing:
Hover to magnify, click for full size
The HPG2 series high pressure gear pump powers small hydraulic systems and small-flow high pressure lubrication systems. Parameter table: Outline drawing:
Parameters
- Pressure
- 20Mpa
- Flow
- 1.4~14 L/min
- Speed
- 400-3500 r/min
- 工作介质
- 矿物液压油等有润滑性的油液
- 典型应用
- 小型液压系统、小流量高压润滑系统
Product details
The HPG2 series high pressure gear pump is used to provide power for small hydraulic systems and for low-flow, high-pressure lubrication systems.
Parameters Table:
Outline Drawing:
Technical parameters:
Specifications
| Model | Displacement cm³ | Flow* L/min | Rated pressure MPa / bar | Peak pressure MPa / bar | Speed r/min | Inlet pressure MPa | Inlet port | Outlet port | A mm | B mm |
|---|---|---|---|---|---|---|---|---|---|---|
| HPG2-1.0 | 1.0 | 1.4 | 20 / 200 | 25 / 250 | 500–3500 | -0.02~0.2 | M16×1.5 / G3/8" | M16×1.5 / G3/8" | 41.1 | 83 |
| HPG2-1.5 | 1.5 | 2.1 | 20 / 200 | 25 / 250 | 500–3500 | -0.02~0.2 | M16×1.5 / G3/8" | M16×1.5 / G3/8" | 42.3 | 85.6 |
| HPG2-2.1 | 2.1 | 2.9 | 20 / 200 | 25 / 250 | 500–3500 | -0.02~0.2 | M16×1.5 / G3/8" | M16×1.5 / G3/8" | 43.1 | 87.2 |
| HPG2-2.5 | 2.5 | 3.5 | 20 / 200 | 25 / 250 | 400–3500 | -0.02~0.2 | M20×1.5 / G1/2" | M16×1.5 / G3/8" | 44 | 89.2 |
| HPG2-3.6 | 3.6 | 5.1 | 20 / 200 | 25 / 250 | 400–3000 | -0.02~0.2 | M20×1.5 / G1/2" | M16×1.5 / G3/8" | 46.4 | 93.9 |
| HPG2-4.2 | 4.2 | 5.9 | 20 / 200 | 25 / 250 | 400–3000 | -0.02~0.2 | M20×1.5 / G1/2" | M16×1.5 / G3/8" | 47.5 | 96.1 |
| HPG2-5.0 | 5.0 | 7.1 | 20 / 200 | 25 / 250 | 400–2500 | -0.02~0.2 | M22×1.5 / G1/2" | M18×1.5 / G3/8" | 49.1 | 99.2 |
| HPG2-6.1 | 6.1 | 8.7 | 20 / 200 | 25 / 250 | 400–2500 | -0.02~0.2 | M22×1.5 / G1/2" | M18×1.5 / G3/8" | 51.4 | 103.8 |
| HPG2-8.5 | 8.5 | 12.1 | 20 / 200 | 25 / 250 | 400–2500 | -0.02~0.2 | M22×1.5 / G1/2" | M18×1.5 / G3/8" | 56.4 | 113.7 |
| HPG2-9.8 | 9.8 | 14 | 20 / 200 | 25 / 250 | 400–2500 | -0.02~0.2 | M22×1.5 / G1/2" | M18×1.5 / G3/8" | 59 | 119 |
* Flow ratings are measured at 1500 rpm.
Dimensional drawing:
