Menu

Oil-Immersed Motors

HAIGTS Technology oil-immersed motors, also called silent motors and high-efficiency motors: the motor runs submerged in the oil tank with the hydraulic oil as the cooling medium, quiet and compact, for hydraulic lifts and quiet hydraulic power stations.

The HAIGTS HNG series is our own brand, and we build it for other customers under contract. It covers three frame sizes,

HNG Series Oil-Immersed Motor

The HAIGTS HNG series is our own brand, and we build it for other customers under contract. It covers three frame sizes, HM, AM and HL, from 11 to 110 kW at 380 V, 50 Hz and 1500 RPM, in single pump and double pump forms. The motor runs fully submerged in the hydraulic oil tank and the oil carries the heat away, so noise stays low and the set stays compact. It suits power units for hydraulic lifts and any hydraulic station that needs a quiet oil source. This page carries four data tables and two outline drawings.

The SB Mec oil-immersed motor is built on IEC 80 / 90 / 100 frames, with B5 and B14 flange mounting faces. The cable ent

SB Mec Oil-Immersed Motor

The SB Mec oil-immersed motor is built on IEC 80 / 90 / 100 frames, with B5 and B14 flange mounting faces. The cable enters through PG11 or PG13 glands, and the key is 6 × 6 × 30 mm or 8 × 7 × 40 mm. This page lists frame, flange, shaft and key dimensions; power and voltage follow the IEC frame and winding selected.

The SB 250 series runs from 51.5 to 73.5 kW (70 to 100 HP), with a 155 mm pump flange (M12 at 190) or a 220 mm flange (M

SB 250 Oil-Immersed Motor

The SB 250 series runs from 51.5 to 73.5 kW (70 to 100 HP), with a 155 mm pump flange (M12 at 190) or a 220 mm flange (M14 at 260), and a 32 mm H7 shaft. Frame length T is 553 mm and frame B is 335 mm. The motor runs fully submerged in the hydraulic oil tank, for heavy-duty hydraulic lifts and hydraulic stations.

The SB 200 series runs from 29.4 to 44.1 kW (40 to 60 HP). It has a 155 mm pump flange or a 220 mm flange with three bol

SB 200 Oil-Immersed Motor

The SB 200 series runs from 29.4 to 44.1 kW (40 to 60 HP). It has a 155 mm pump flange or a 220 mm flange with three bolt circles (M12 at 190, M10 at 195 and M12 at 260), and a 32 mm H7 shaft. Frame length T is 418 to 478 mm. The motor runs fully submerged in the hydraulic oil tank, for heavy hydraulic lifts and hydraulic stations.

The SB 150-B series runs from 12.5 to 22 kW (17 to 30 HP), with a 220 mm pump flange (4 × M12) and either a 19 mm H7 or

SB 150-B Oil-Immersed Motor

The SB 150-B series runs from 12.5 to 22 kW (17 to 30 HP), with a 220 mm pump flange (4 × M12) and either a 19 mm H7 or 32 mm H7 shaft. Four power steps cover frame lengths of 405 and 437.5 mm. The motor runs fully submerged in the hydraulic oil tank, for hydraulic lift power units.

The SB 150-A series runs from 4.7 to 22 kW (6.5 to 30 HP), with a 155 mm pump flange (4 × M12) and either a 19 mm H7 or

SB 150-A Oil-Immersed Motor

The SB 150-A series runs from 4.7 to 22 kW (6.5 to 30 HP), with a 155 mm pump flange (4 × M12) and either a 19 mm H7 or 32 mm H7 shaft. Nine power steps cover four frame lengths from 298.5 to 420 mm. The motor runs fully submerged in the hydraulic oil tank, for hydraulic lift power units and quiet hydraulic stations.

The Mini Lift series is a compact oil-immersed motor from 1.5 to 3.3 kW (2 to 4.5 HP), available in single-phase 230 V a

Mini Lift Series Oil-Immersed Motor

The Mini Lift series is a compact oil-immersed motor from 1.5 to 3.3 kW (2 to 4.5 HP), available in single-phase 230 V and three-phase 230 / 400 V, at 50 Hz or 60 Hz. It has an 82.55 mm pump flange and a 14 mm H7 shaft with a 5 J9 key. The motor runs fully submerged in the hydraulic oil tank, with the oil acting as the cooling medium, for home lifts and small hydraulic power units.

The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. I

Oil-Immersed Motor

The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. It has an aluminium housing with cooling fins, flange mounting and a top terminal box, and runs quietly with a compact build, making it suitable for hydraulic lifts and hydraulic stations that need a quiet oil source.

The HAIGTS HNG series is our own brand, and we build it for other customers under contract. It covers three frame sizes,

HNG Series Oil-Immersed Motor

The HAIGTS HNG series is our own brand, and we build it for other customers under contract. It covers three frame sizes, HM, AM and HL, from 11 to 110 kW at 380 V, 50 Hz and 1500 RPM, in single pump and double pump forms. The motor runs fully submerged in the hydraulic oil tank and the oil carries the heat away, so noise stays low and the set stays compact. It suits power units for hydraulic lifts and any hydraulic station that needs a quiet oil source. This page carries four data tables and two outline drawings.

The SB Mec oil-immersed motor is built on IEC 80 / 90 / 100 frames, with B5 and B14 flange mounting faces. The cable ent

SB Mec Oil-Immersed Motor

The SB Mec oil-immersed motor is built on IEC 80 / 90 / 100 frames, with B5 and B14 flange mounting faces. The cable enters through PG11 or PG13 glands, and the key is 6 × 6 × 30 mm or 8 × 7 × 40 mm. This page lists frame, flange, shaft and key dimensions; power and voltage follow the IEC frame and winding selected.

The SB 250 series runs from 51.5 to 73.5 kW (70 to 100 HP), with a 155 mm pump flange (M12 at 190) or a 220 mm flange (M

SB 250 Oil-Immersed Motor

The SB 250 series runs from 51.5 to 73.5 kW (70 to 100 HP), with a 155 mm pump flange (M12 at 190) or a 220 mm flange (M14 at 260), and a 32 mm H7 shaft. Frame length T is 553 mm and frame B is 335 mm. The motor runs fully submerged in the hydraulic oil tank, for heavy-duty hydraulic lifts and hydraulic stations.

The SB 200 series runs from 29.4 to 44.1 kW (40 to 60 HP). It has a 155 mm pump flange or a 220 mm flange with three bol

SB 200 Oil-Immersed Motor

The SB 200 series runs from 29.4 to 44.1 kW (40 to 60 HP). It has a 155 mm pump flange or a 220 mm flange with three bolt circles (M12 at 190, M10 at 195 and M12 at 260), and a 32 mm H7 shaft. Frame length T is 418 to 478 mm. The motor runs fully submerged in the hydraulic oil tank, for heavy hydraulic lifts and hydraulic stations.

The SB 150-B series runs from 12.5 to 22 kW (17 to 30 HP), with a 220 mm pump flange (4 × M12) and either a 19 mm H7 or

SB 150-B Oil-Immersed Motor

The SB 150-B series runs from 12.5 to 22 kW (17 to 30 HP), with a 220 mm pump flange (4 × M12) and either a 19 mm H7 or 32 mm H7 shaft. Four power steps cover frame lengths of 405 and 437.5 mm. The motor runs fully submerged in the hydraulic oil tank, for hydraulic lift power units.

The SB 150-A series runs from 4.7 to 22 kW (6.5 to 30 HP), with a 155 mm pump flange (4 × M12) and either a 19 mm H7 or

SB 150-A Oil-Immersed Motor

The SB 150-A series runs from 4.7 to 22 kW (6.5 to 30 HP), with a 155 mm pump flange (4 × M12) and either a 19 mm H7 or 32 mm H7 shaft. Nine power steps cover four frame lengths from 298.5 to 420 mm. The motor runs fully submerged in the hydraulic oil tank, for hydraulic lift power units and quiet hydraulic stations.

The Mini Lift series is a compact oil-immersed motor from 1.5 to 3.3 kW (2 to 4.5 HP), available in single-phase 230 V a

Mini Lift Series Oil-Immersed Motor

The Mini Lift series is a compact oil-immersed motor from 1.5 to 3.3 kW (2 to 4.5 HP), available in single-phase 230 V and three-phase 230 / 400 V, at 50 Hz or 60 Hz. It has an 82.55 mm pump flange and a 14 mm H7 shaft with a 5 J9 key. The motor runs fully submerged in the hydraulic oil tank, with the oil acting as the cooling medium, for home lifts and small hydraulic power units.

The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. I

Oil-Immersed Motor

The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. It has an aluminium housing with cooling fins, flange mounting and a top terminal box, and runs quietly with a compact build, making it suitable for hydraulic lifts and hydraulic stations that need a quiet oil source.

Featured cases

Dust, vibration and low temperature are normal on a construction site, and the hydraulic pump decides whether the machin…

Application of gear pumps in the construction machinery industry and mechanical engineering industry

Dust, vibration and low temperature are normal on a construction site, and the hydraulic pump decides whether the machine keeps working. This article covers the lift, steering and fan circuits and how to size them.

Lubrication, shaft lifting, sealing oil and governing all rely on auxiliary oil systems around the main machine. The art…

Hydraulic pumps in energy and power applications

Lubrication, shaft lifting, sealing oil and governing all rely on auxiliary oil systems around the main machine. The article sorts the pump sets by function and explains redundancy.

Turbine oil lubricates the bearings and carries their heat away, so a loss of supply or of temperature control puts the…

Screw pumps and coolers are widely used for lubrication, cooling, and other purposes in thermal, hydropower, and wind power in the electric power industry

Turbine oil lubricates the bearings and carries their heat away, so a loss of supply or of temperature control puts the whole unit at risk. This article covers thermal, hydro and wind service.

Rolling mills and continuous casters run day and night, so one stopped pump can halt a line. The article separates hydra…

Gear pumps, screw pumps, and coolers for the metal smelting industry are widely used in metallurgical hydraulic stations and lubrication and cooling systems

Rolling mills and continuous casters run day and night, so one stopped pump can halt a line. The article separates hydraulic power from lubrication supply and gives the selection points.

Machine tool hydraulics ask little flow but much repeatability, steady holding and low noise. The article walks through…

Gear pumps and sensor instruments in the machine tool industry are used for equipment such as CNC machine tools, machining centers, injection molding machines, presses, and machines.

Machine tool hydraulics ask little flow but much repeatability, steady holding and low noise. The article walks through three circuit groups and the usual troubleshooting order.

Most gearbox failures start with the oil: too hot, a blocked filter or too little supply. The article opens up one compl…

Gearbox industrial gear pumps and screw pumps as well as coolers can be used for the gearbox's matching lubrication and cooling system.

Most gearbox failures start with the oil: too hot, a blocked filter or too little supply. The article opens up one complete circuit and explains the temperature stages and bypass protection.

Anchor winches, deck cranes, steering gears and port cranes start, stop and reverse repeatedly under heavy load. The art…

Coolers, gear pumps, and hydraulic motors in the marine industry can be used in equipment such as marine hydraulic systems, deck machinery, and port.

Anchor winches, deck cranes, steering gears and port cranes start, stop and reverse repeatedly under heavy load. The article covers cooling, materials, class approval and inspection access.

Petrochemical media range from crude and fuel oil to solvents and additives, so the medium comes before the numbers. The…

Gear pumps and coolers in the petrochemical industry can be used in the oil and gas industry as well as the chemical and pharmaceutical industries

Petrochemical media range from crude and fuel oil to solvents and additives, so the medium comes before the numbers. The article splits the duty into three tasks and lists the usual failure modes.