Oil-Immersed Motor
The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. It has an aluminium housing with cooling fins, flange mounting and a top terminal box, and runs quietly with a compact build, making it suitable for hydraulic lifts and hydraulic stations that need a quiet oil source.
7 images · hover the main image to magnify, click for full size; point at a thumbnail to preview
The oil-immersed lift motor runs fully submerged in the oil tank, with the hydraulic oil acting as the cooling medium. It has an aluminium housing with cooling fins, flange mounting and a top terminal box, and runs quietly with a compact build, making it suitable for hydraulic lifts and hydraulic stations that need a quiet oil source.
Parameters
- Speed
- 800-2950rpm
- Voltage
- 220/380/415/460/575 V
- Frequency
- 50-60 Hz
- 结构形式
- 油浸式(浸油运行)
- 安装方式
- 法兰安装
- 冷却方式
- 液压油浸没冷却
- 防护等级
- IP00,必须装在防护外壳内
- 工作制
- S2 最长 30 min;S4 断续周期最大 40%(1.3 倍额定转矩 45 s,60 次/小时)
Product details
Design features
- Oil-immersed operation: the motor runs submerged in the hydraulic oil tank, and the oil carries the heat away, so no external fan is needed.
- Aluminium alloy housing with cooling fins; machined end faces for flange mounting.
- A terminal box on top carries the power and protective leads, with oil-resistant cable sheathing.
- Smooth, quiet running for places that require low noise.
Typical applications
- Hydraulic lift power units (passenger, goods and home lifts)
- Hydraulic test benches and hydraulic stations that need a quiet oil source
Selection and installation
Match the motor power and speed to the pump displacement, system pressure and required flow. Make sure the motor is fully submerged in oil during operation, and use the oil grade and oil temperature specified for the hydraulic system.
Technical data
| Parameter | Value |
|---|---|
| Housing | Aluminium alloy with cooling fins |
| Typical applications | Hydraulic lifts, hydraulic test benches, quiet power units |
| Suitable oil | HLP or HL hydraulic paraffinic oil (DIN 51524-2 / 51524-1), viscosity ISO VG 32–68 |
| Oil temperature | 65 °C maximum; 60 °C maximum in continuous S1 duty |
| Water content in oil | 800 ppm maximum |
| Oil cleanliness | ISO 17/14 or NAS 8/9 when new; ISO 18/15 or NAS 9/10 in service |
| Thermal protection | PTC thermistors in the windings must be wired (2.5 VDC at the terminals, 30 VDC maximum) |
| Submergence | The motor must stay below the lowest oil level, with the lift car at the top floor |
| Rotation | Counter-clockwise looking at the motor front flange; swap two of the three phases to reverse |
| Storage | −20 to +60 °C, no longer than 6–12 months |
| Power range | 1.5–73.5 kW (2–100 HP) |
| Poles | 2-pole |
| Frequency | 50 / 60 Hz |
| Voltage | Three-phase 230 / 400 / 415 / 690 / 720 V; single-phase 230 V |
| Voltage tolerance | -10 % to +6 % |
| Cable length | 1000 mm |
| Overload capacity | 1.3 times rated torque |
| PTC | One per phase at 110 °C in the windings; 70 °C PTC in the oil (optional) |
| Eyebolt | Optional |
Series and power range
| Series (model range) | Power range | Pump flange diameter | Shaft diameter | Cooling |
|---|---|---|---|---|
| SB Mini Lift (SBBL010–125) | 1.5–3.3 kW (2–4.5 HP) | Ø82.55 mm | Ø14 mm | Oil-immersed |
| SB 150-A (SBBL150–278) | 4.7–22 kW (6.5–30 HP) | Ø155 mm | Ø19 mm | Oil-immersed |
| SB 150-A CN (SBBL440–499) | 1.5–3.3 kW (2–4.5 HP) | Ø155 mm | Ø19 mm | Oil-immersed |
| SB 150-B (SBBL840–873) | 12.5–24 kW (17–32.7 HP) | Ø220 mm | Ø32 mm | Oil-immersed |
| SB 200 (SBBL410–438) | 29.4–44.1 kW (40–60 HP) | Ø155 mm | Ø32 mm | Oil-immersed |
| SB 200 USA (SBBL280–308) | 29.4–44.1 kW (40–60 HP) | Ø220 mm | Ø32 mm | Oil-immersed |
| SB 250 (SBBL310–338) | 51.5–73.5 kW (70–100 HP) | Ø155 mm | Ø32 mm | Oil-immersed |
| SB 250 (SBBL340–368) | 51.5–73.5 kW (70–100 HP) | Ø220 mm | Ø32 mm | Oil-immersed |
| SB Dry (SBBL820–839) | 1.5–2.9 kW (2–4 HP) | Ø165 mm | Ø19 / 24 mm | Air-cooled (IP54) |
