Menu

4Q Continuum Four-Quadrant Screw Pump

The 4Q Continuum four-quadrant screw pump uses SETTIMA bi-helical rotor technology. It works as both a pump and a motor in either direction, recovers energy in closed-loop circuits, runs ultra-silent, and is ultra compact; both of its deliveries can connect directly to a cylinder without directional or flow-control valves.

4Q Continuum Four-Quadrant Screw Pump

5 images · hover the main image to magnify, click for full size; point at a thumbnail to preview

The 4Q Continuum four-quadrant screw pump uses SETTIMA bi-helical rotor technology. It works as both a pump and a motor in either direction, recovers energy in closed-loop circuits, runs ultra-silent, and is ultra compact; both of its deliveries can connect directly to a cylinder without directional or flow-control valves.

Parameters

Pressure
200 bar
Speed
6,500 rpm
工作方式
四象限:泵与马达两用,正反双向
最高工作压力
200 bar(Continuum 系列)
排量范围
2.0–300 cc/rev(Continuum 系列)
最高转速
6,500 rpm
典型应用
垃圾车、农业机械、物料搬运、电动与混合动力汽车、注塑、压机、采矿、卡车液压系统
Call us

Product details

4Q Continuum is SETTIMA's four-quadrant hydraulic pump built on the ultra-silent Continuum technology. Its rotors use a bi-helical profile, so one unit works in all four quadrants: it delivers flow as a pump, recovers energy as a motor, and runs steadily in both directions.

In closed-loop circuits, 4Q Continuum recovers the hydraulic energy of a lowering load, so both positive and negative loads can be raised and lowered under control. Combined with a SpinRel electric motor, the recovered flow can be converted into electricity and stored in a battery, which increases the energy saving further.

4Q Continuum also simplifies the hydraulic circuit: both pump deliveries can be connected directly to the cylinder. Motor speed sets the flow, rotation direction sets the direction of movement, and motor torque control sets the system pressure, so directional valves and flow-control valves can be eliminated. The pump is ultra compact and can replace a standard gear pump.

Main advantages

  • Ultra-silent, at the same low noise level as Continuum and far below standard gear and vane pumps
  • Works as a pump and as a motor in all four quadrants, in both directions
  • Recovers energy in closed-loop circuits for lower energy consumption
  • Ultra compact, interchangeable with standard gear pumps
  • Can be combined with a SpinRel motor into one electro-hydraulic unit that turns the recovered flow into electricity

Typical applications

Refuse trucks, agricultural machinery, material handling, electric and hybrid vehicles, injection molding machines, presses, mining equipment, truck hydraulic systems.

Technical data
Type Bi-helical rotor pump
Operating mode Four-quadrant: pump and motor, both directions
Maximum working pressure 200 bar (Continuum range)
Displacement range 2.0–300 cc/rev (Continuum range)
Maximum speed 6,500 rpm
Noise About 15 dB(A) lower than standard gear and vane pumps
Pulsation and vibration The rotor profile traps no fluid, so pulsation and vibration are extremely low
Speed behaviour Stable and consistent performance at variable speed, even with abrupt speed changes
Circuit connection Both deliveries can be connected directly to the cylinder, eliminating directional and flow-control valves
Control Speed sets the flow, rotation direction sets the direction of movement, motor torque control sets the system pressure
Energy recovery Recovers load energy in closed-loop circuits; with a SpinRel motor it can be converted into electricity and stored in a battery
Interchangeability Interchangeable with standard gear pumps
Typical applications Refuse trucks, agricultural machinery, material handling, electric and hybrid vehicles, injection molding, presses, mining, truck hydraulics

Technical data

ParameterValue
TypeBi-helical rotor pump
NoiseAbout 15 dB(A) lower than standard gear and vane pumps
Pulsation and vibrationThe rotor profile traps no fluid, so pulsation and vibration are extremely low
Circuit connectionBoth deliveries can be connected directly to the cylinder, eliminating directional and flow-control valves
ControlSpeed sets the flow, rotation direction sets the direction of movement, motor torque control sets the system pressure
Energy recoveryRecovers load energy in closed-loop circuits; with a SpinRel motor it can be converted into electricity and stored in a battery
InterchangeabilityInterchangeable with standard gear pumps