GR Series High Pressure Screw Pump
HAIGTS Technology screw pumps are original imported Italian SETTIMA screw pumps. The GR series screw pumps are high pressure screw pumps with maximum pressure up to 25MP(250bar), compliant with European BKT, SAE-A standards and German SAE-B standard.
Hover to magnify, click for full size
HAIGTS Technology screw pumps are original imported Italian SETTIMA screw pumps. The GR series screw pumps are high pressure screw pumps with maximum pressure up to 25MP(250bar), compliant with European BKT, SAE-A standards and German SAE-B standard.
Parameters
- Pressure
- 250 bar
- Flow
- 0-400L/min(1500rpm)
- Speed
- 3600 rpm
- 工作压力
- 连续 270 bar,间歇 280 bar,峰值 300 bar
- 介质
- 矿物油 HLP/HLVP、植物油、乳化液、水乙二醇、磷酸酯等有润滑性的液体
- 粘度范围
- 12–800 cSt(推荐 20–150 cSt,启动时不大于 2000 cSt)
- 介质温度
- −20 至 +80 ℃
- Material
- 泵体合金铝(铸铁可选),螺杆合金钢
Product details
HAIGTS Technology screw pumps are SETTIMA screw pumps imported directly from Italy. The GR series screw pump is a high pressure screw pump whose maximum pressure can reach 25MP(250bar), complying with European BKT,SAE-A standards and German SAE-B standards.
| Technical parameters | |
|---|---|
| Available models | GR28/GR33/GR38/GR47/GR55/GR72/GR110 |
| Pump body flange connection standard | Complies with European BKT,SAE-A standards or German SAE-B standards (optional) |
| Oil port connection standard | GAS thread or SAE3000/6000 welded flange |
| Pump rotation direction | Viewed from the motor connection shaft direction (clockwise) |
| Speed range | 800-3600rpm |
| Flow range | 1-400 L/min(1500rpm) |
| Working pressure (*) | Continuous working pressure: 270bar |
| Intermittent working pressure: 280bar | |
| Peak pressure: 300bar | |
| See performance parameters for details | |
| Suction port pressure | 0.8-2bar (maximum pressure 10bar, optional) |
| Medium | Mineral oil HLP or HLVP |
| Vegetable oil HETG-HEPG-HEE | |
| Special fluids and emulsions | |
| HFA emulsion oil-water mixture, oil content must not be less than 5% | |
| HFB emulsion oil-water mixture, oil content must not be less than 40% | |
| HFC water-glycol, water content range 35-55% | |
| HFDR phosphate ester | |
| High viscosity lubricating oil | |
| Special synthetic fluids, for example: MIL-H, SKYDROL, etc.; please contact us for others | |
| Medium viscosity range | Permissible working range: 12-800cst |
| Recommended working range: 20-150cst | |
| Initial starting viscosity value: must not be greater than 2000cst | |
| Medium temperature during operation | -20 to +80℃ |
| Ambient temperature range | -15 to +60℃ |
| Filtration precision | Suction port 100μm |
| Pressure port 10-25μm | |
| Pump body seal material selection | NBR, VTTON, FPM, EPDM, etc. |
| Noise level | Between 52-63dB(A) at a speed of 2750rpm, test standard ISO 4412 |
| Standard pump body material | Aluminum alloy (cast iron optional) |
| Screw material | Alloy steel (specially hardened) |
| Maintenance and use | Please refer to the instruction manual in detail or contact us |
Technical data
| Parameter | Value |
|---|---|
| Structure | Three-screw pump, horizontal |
| Flange standard | European BKT, SAE-A or German SAE-B (optional) |
| Port connections | GAS thread or SAE 3000/6000 weld-on flange |
| Speed range | 800–3600 rpm |
| Flow range | 1–400 L/min at 1500 rpm |
| Filtration | 100 µm at the suction port, 10–25 µm in the pressure line |
