NG coupling Screw Pumps
The NG coupling screw pump is built on the Settima SMT16B three-screw pump. The shaft is connected to the motor through a coupling, with pump and motor mounted separately, for low and medium pressure duty up to 40 bar where quiet running and a long service life are required.
5 images · hover the main image to magnify, click for full size; point at a thumbnail to preview
The NG coupling screw pump is built on the Settima SMT16B three-screw pump. The shaft is connected to the motor through a coupling, with pump and motor mounted separately, for low and medium pressure duty up to 40 bar where quiet running and a long service life are required.
Parameters
- Pressure
- 40bar
- Flow
- 20-120
- Speed
- 1500-3000
- 工作压力
- 40 bar 连续
- Flow rate
- 20-120 L/min
- Speed
- 1500-3000 rpm
- 连接方式
- 联轴器传动,泵与电机分体布置
- 工作介质
- 矿物油 HLP/HLVP、植物油、乳化液、水乙二醇、磷酸酯等有润滑性的液体
- 粘度范围
- 1–2000 mm²/s
- 介质温度
- −20 至 +180 ℃
- 安装形式
- 卧式
Product details
NG three-screw pump with coupling
The Settima NG coupling series is an industrial three-screw pump of the SMT16B family, suitable for low and medium pressure up to 40 bar. It is a reliable, noiseless solution for applications that demand a long service life at low cost.
Unlike the close-coupled versions, the NG series connects pump and motor through a coupling, both mounted separately on the same baseplate. This makes it easier to adjust the distance to the machine, to pair the pump with different motor ratings and to remove the pump for maintenance without touching the motor.
How it is built
- The pump body and screw set are designed to avoid any axial load.
- Functional pressure creates clearance between the balance piston of the main screw and the surrounding body, generating a balancing hydraulic force while lubricating and cooling the sealing components.
- The pumped fluid hydraulically transmits the torque needed to turn the idler screws, so no mechanical wear occurs during rotation.
- The geometry of the three screws forms a sealed chamber; as the main screw rotates it creates a cavity that moves fluid axially from the inlet to the outlet.
Typical applications
- Oil supply and circulation in hydraulic power packs and lubrication systems;
- Lubrication and cooling of gearboxes and bearings;
- Transfer of fuel, lubricating oil and other fluids from low to high viscosity;
- Continuous duty where low noise and long service life are required.
Appearance:
Technical data
| Parameter | Value |
|---|---|
| Model series | NG |
| Working pressure | 40 bar continuous |
| Flow | 20-120 L/min |
| Speed | 1500-3000 rpm |
| Drive | Coupling, pump and motor mounted separately |
| Working medium | Mineral oil HLP/HLVP, vegetable oil, emulsions, water-glycol, phosphate esters and other lubricating fluids |
| Viscosity | 1-2000 mm2/s |
| Fluid temperature | -20 to +180 C |
| Mounting | Horizontal |