SMAPI Series
The Settima SMAPI is a cased three-screw pump designed and built to API 676 (third edition), also suitable for ISO 8217 marine fuels, with flow up to about 4900 L/min. It serves oil and gas from upstream to downstream, marine and power generation, handling crude oil, fuel oil, lubricating oil and gasoline. The SMAPI NC is the lower-cost version without a separate casing or liner.
Hover to magnify, click for full size
The Settima SMAPI is a cased three-screw pump designed and built to API 676 (third edition), also suitable for ISO 8217 marine fuels, with flow up to about 4900 L/min. It serves oil and gas from upstream to downstream, marine and power generation, handling crude oil, fuel oil, lubricating oil and gasoline. The SMAPI NC is the lower-cost version without a separate casing or liner.
Parameters
- Pressure
- 80 bar
- Flow
- 20-9500L/min
- Speed
- 3000
- Standard
- API 676(第 3 版)
- 最大流量
- 约 4900 L/min
- 工作压力
- 80 bar
- 工作介质
- 原油、燃料油(含 ISO 8217 船用燃油)、润滑油、汽油等
- 安装形式
- 卧式,独立壳体;NC 型不带独立壳体
Product details
API 676 three-screw pump
A dry screw pump designed and manufactured to API 676 (third edition), also suitable for high-flow duties, with flow up to about 4900 L/min.
The Settima SMAPI is a cased three-screw pump designed and built to API 676 and also suitable for ISO 8217 marine fuels. More than 40 years of experience and millions of pumps installed worldwide back the quality of Settima screws, ensuring high performance, high reliability and very low sound emission and pulsation.
The casing can be made of ASME carbon steel or stainless steel to API and other international standards; the internal cartridge can be cast iron or aluminium, and the screws are made in different materials according to the fluid handled. Three screws rotate inside the pump body with no axial load: functional pressure creates clearance between the balance piston of the main screw and the surrounding body, generating a balancing hydraulic force while lubricating and cooling the sealing components. The torque needed to turn the idler screws is transmitted hydraulically by the pumped fluid, so the screws do not wear as they rotate.
Each SMAPI pump is built to the required flow and pressure. Maintenance is simple: the cartridge can be removed and refitted without disconnecting the pump from the system.
Applications and fluids
Main markets are oil and gas, marine, offshore and power generation. The pump handles crude oil, diesel fuel, engine oil, gasoline, naphtha and similar fluids.
SMAPI NC: lower standard cost
The SMAPI NC is the API 676 three-screw pump without a separate casing or liner: the screws run directly in a carbon steel housing, which removes the need for expensive internal coatings and a redundant casing. There are no flat gaskets, only O-rings, to avoid leak paths. It is the right choice for reducing the standard cost of an API 676 pump and runs reliably in upstream, midstream and downstream oil and gas operations.
- Handles different flows, pressures, fluid types and viscosities;
- High volumetric efficiency;
- Low mechanical vibration for a longer service life;
- Low internal speed;
- Truly smooth and quiet operation;
- High tolerance to entrained air;
- Very low pulsation, which reduces pressure peaks and extends the life of pipes, hoses and other connected parts.
Application field:

Technical data
| Parameter | Value |
|---|---|
| Casing material | ASME carbon steel, stainless steel |
| Cartridge material | Cast iron, aluminium |
| Main applications | Oil and gas, marine, power generation |
