Menu

Products

High-quality industrial pumps and hydraulic equipment for every industry

5F

Hydraulic Cylinders Series

View more
Hydraulic oscillating cylinders are available in gear type and vane type. Maximum pressure 300 bar, torque up to 48 kNm,

Vane Type Hydraulic Swing Cylinder

Hydraulic oscillating cylinders are available in gear type and vane type. Maximum pressure 300 bar, torque up to 48 kNm, rotation angle up to 270 degrees. Suitable for valves, loaders, large mining machinery, shipbuilding and port machinery. A high frequency cylinder series is available for servo hydraulic systems, test benches and heavy high-speed rotating mechanisms, with various drive shafts to choose from.

Maximum pressure 300bar, torque up to 48KNM, swing angle up to 270 degrees. Suitable for valves, loaders, large mining m

Gear Type Hydraulic Swing Cylinder

Maximum pressure 300bar, torque up to 48KNM, swing angle up to 270 degrees. Suitable for valves, loaders, large mining machinery, shipbuilding and port machinery. The high frequency cylinder series can be applied to servo hydraulic systems, test benches and heavy-duty high-speed rotating mechanisms. Multiple drive shafts are selectable. A relief valve block is optional. A servo valve set is optional.

The HAIGTS high frequency servo cylinder gives high switching frequency and long service life. Working pressure up to 28

High Frequency Servo Cylinder

The HAIGTS high frequency servo cylinder gives high switching frequency and long service life. Working pressure up to 28 MPa, bore up to 350 mm, speed up to 20 m/s and frequency up to 90 Hz.

HSG series hydraulic cylinder, HSG cylinder, external connection type cylinder, internal key connected cylinder, flange

HSG Series

HSG series hydraulic cylinder, HSG cylinder, external connection type cylinder, internal key connected cylinder, flange connected cylinder.

The DG series hydraulic cylinders are double-acting single piston rod hydraulic cylinders. Product models include DJ-J40

DG Series

The DG series hydraulic cylinders are double-acting single piston rod hydraulic cylinders. Product models include DJ-J400C-E, DJ-J500C-E, DJ-J630C-E, DJ-J800C-E, DJ-J900C-E, DJ-J1000C-E, DJ-J1100C-E, DJ-J1250C-E, DJ-J1400C-E, DJ-J1500C-E, DJ-J1600C-E, DJ-J1800C-E, DJ-J200C-E and more.

HD series hydraulic cylinders are for metallurgy equipment, with bore 40-320 mm, piston diameter 22-220 mm and long stro

HD Series

HD series hydraulic cylinders are for metallurgy equipment, with bore 40-320 mm, piston diameter 22-220 mm and long stroke; eye connection, pin installation, foot mount or flange mounting are available.

6F

Power Units Series

View more

Featured cases

Dust, vibration and low temperature are normal on a construction site, and the hydraulic pump decides whether the machin…

Application of gear pumps in the construction machinery industry and mechanical engineering industry

Dust, vibration and low temperature are normal on a construction site, and the hydraulic pump decides whether the machine keeps working. This article covers the lift, steering and fan circuits and how to size them.

Lubrication, shaft lifting, sealing oil and governing all rely on auxiliary oil systems around the main machine. The art…

Hydraulic pumps in energy and power applications

Lubrication, shaft lifting, sealing oil and governing all rely on auxiliary oil systems around the main machine. The article sorts the pump sets by function and explains redundancy.

Turbine oil lubricates the bearings and carries their heat away, so a loss of supply or of temperature control puts the…

Screw pumps and coolers are widely used for lubrication, cooling, and other purposes in thermal, hydropower, and wind power in the electric power industry

Turbine oil lubricates the bearings and carries their heat away, so a loss of supply or of temperature control puts the whole unit at risk. This article covers thermal, hydro and wind service.

Rolling mills and continuous casters run day and night, so one stopped pump can halt a line. The article separates hydra…

Gear pumps, screw pumps, and coolers for the metal smelting industry are widely used in metallurgical hydraulic stations and lubrication and cooling systems

Rolling mills and continuous casters run day and night, so one stopped pump can halt a line. The article separates hydraulic power from lubrication supply and gives the selection points.

Machine tool hydraulics ask little flow but much repeatability, steady holding and low noise. The article walks through…

Gear pumps and sensor instruments in the machine tool industry are used for equipment such as CNC machine tools, machining centers, injection molding machines, presses, and machines.

Machine tool hydraulics ask little flow but much repeatability, steady holding and low noise. The article walks through three circuit groups and the usual troubleshooting order.

Most gearbox failures start with the oil: too hot, a blocked filter or too little supply. The article opens up one compl…

Gearbox industrial gear pumps and screw pumps as well as coolers can be used for the gearbox's matching lubrication and cooling system.

Most gearbox failures start with the oil: too hot, a blocked filter or too little supply. The article opens up one complete circuit and explains the temperature stages and bypass protection.

Anchor winches, deck cranes, steering gears and port cranes start, stop and reverse repeatedly under heavy load. The art…

Coolers, gear pumps, and hydraulic motors in the marine industry can be used in equipment such as marine hydraulic systems, deck machinery, and port.

Anchor winches, deck cranes, steering gears and port cranes start, stop and reverse repeatedly under heavy load. The article covers cooling, materials, class approval and inspection access.

Petrochemical media range from crude and fuel oil to solvents and additives, so the medium comes before the numbers. The…

Gear pumps and coolers in the petrochemical industry can be used in the oil and gas industry as well as the chemical and pharmaceutical industries

Petrochemical media range from crude and fuel oil to solvents and additives, so the medium comes before the numbers. The article splits the duty into three tasks and lists the usual failure modes.